Below are simple layout that I use in my home network. It’s pretty much straight forward.
Once eveything is been setup properly, go to next step.
Before we go ahead to configure the router, first we need to make sure that our streamyx line is activate. Once activated, DSL indicator in router should turn green. Otherwise, contact TM 100,they will be very helpfull to help you.
1. Open your browser in pc which is connected to router
2. Connect to http://192.168.1.1 , you will be prompt to enter user name and password.
Default : username = admin, password = admin
3. Change Encapsulation to PPPoE, virtual circuit and PPPoE setting.
4. If everything ok, your can check status to see whether ip address is assigned properly to your router.
5. Enable your wireless connection.
6. Done. enjoy your surfing.
p/s: this is really simple explanation, if you are not understand and have something to ask,just leave a comment.